Cleaning floor grout can be a nightmare. No one likes to be on their hands and knees scrubbing the floor. Yet, people have done it for years to keep their floors looking great.
The truth is you don’t have to scrub at all. There’s a really simple trick that can make it so easy to clean floor grout. Let’s take a closer look at getting sparkling clean floor grout without scrubbing.
What cleans grout best?
That really depends on what you’re looking for. Do you want something natural? Something quick? The Spruce did an article on The 7 Best Grout Cleaners of 2021, if you’re interested in the traditional commercial route.
What is the best homemade tile grout cleaner?
If you’re looking for something safe and natural, hydrogen peroxide mixed with baking soda is your best bet. You’ll create a paste using the two ingredients and spread it along the grout line. Let sit and then scrub away the dirt.
You may need to use some elbow grease, but these ingredients are safe to use and can also be used to clean a number of other things around your home.
How do you get floor grout white again?
If you want to get your grout white again, the answer may surprise you. Toilet bowl cleaner for cleaning grout has been a popular hack for many years.
Want more info? Keep reading.
How to Clean Floor Grout without Scrubbing
WARNING: Some people warn that this method can damage grout. Proceed with caution.
The key to clean floor grout without scrubbing is to use the right cleaner. Now, what you need to use may surprise you. However, one of the best cleaners you can use is gel toilet bowl cleaner.
You must get the gel kind, or you’ll just have a mess. The gel is thick and will stay in the grout lines. You also want to make sure the product has bleach in it. Cleaning pros recommend Clorox Toilet Bowl Cleaner.
What You’ll Need:
- Clorox Gel Toilet Bowl Cleaner
- Old Toothbrush
- Bucket of Clean Water
- Old Rags
The first step is to sweep your floors to remove any loose dirt. If you want, you can then run a damp mop over the surface to get up any lingering dust.
Once your floor is swept clean, run the tip of the toilet bowl cleaner bottle along the grout lines. You’ll want to move quickly, so it doesn’t run all over the place.
Allow the mixture to sit in the grout lines for around 10 minutes. You can then use an old brush to loosen the remaining dirt.
Use a bucket of clean water and a rag to wipe up the dirt as you work. Make sure to change the water out often. Make no mistake. This is a dirty job.
If your grout hasn’t been cleaned in a while, you may have to do this more than once to loosen all the dirt.
The final step would be to give your floor a good mopping so that everything looks fresh and clean.
Bleach is a very strong chemical that can damage surfaces. You want to make sure your tiles will not be damaged by bleach.
For example, if you have natural stone tiles, this is not a method you want to use. Leaving this solution on your grout for too long may also damage the grout.
You want to be careful to err on the side of caution. If your grout isn’t filthy, leave it on for only 5 minutes. Do note that some say this can damage grout as well because it’s porous. Proceed with caution.
You also want to be careful to clean the floors thoroughly after rinsing to remove any chemical residues from the surface. This is especially true if you have pets or children that are crawling age.
Is toilet bowl cleaner the solution for your dirty grout? If you’ve tried other methods with no success – or your grout is really nasty – you may want to give it a shot. Just be aware of the warnings.