|

What Causes Your Garland Range Pilot Light to Keep Going Out?

This post may contain affiliate links which might earn us money. Please read my Disclosure and Privacy policies here
Pinterest Hidden Image

A Garland range is supposed to keep your commercial kitchen's pace high, but instead, your cooks struggle with a burner that won't light every day. If your Garland range pilot light won't stay lit, the causes range from a dirty pilot orifice to a faulty thermocouple.

Some problems can be resolved in a relatively easy way, while others call for replacement Garland parts and professional repairs. The good news is that most of the time, the repair cost isn't going to be high. Let's go through the most common causes and how to get your commercial range back in service.

A person lights a gas burner with a match while adjusting a stove knob, illustrating the topic of range pilot light troubleshooting.

Culprit #1 (Most Common) – Thermocouple Is Faulty or Has a Loose Connection

Garland oven pilot light goes out when you release the control knob or reset button? A thermocouple is often responsible for this. It's a small metal sensor near the pilot flame that generates a tiny electrical signal when heated, which keeps the gas valve open to keep the gas flowing.

When that signal weakens from age, soot buildup, poor connection, or a cracked tip, the valve doesn't get a strong enough signal.

Pay attention to these signs of thermocouple problems:

  • The pilot lights but goes out shortly after the control is released.
  • The flame appears normal, but the safety system doesn't hold.
  • The pilot repeatedly shuts off despite following the correct lighting procedure.

Note: Check your model's manual for lighting instructions. Some Garland ranges require the control to remain pressed for a specified period after ignition.

A failed thermocouple needs replacing. Luckily, it's an inexpensive part and the repair is not complicated.

Culprit #2 – Dirty or Clogged Pilot Orifice

It's natural for kitchens to deal with grease and food debris. Over time, grease and other types of contamination can clog the small opening that delivers gas to the pilot burner. This makes the pilot difficult to ignite or causes a weak, unstable flame.

If the pilot opening appears blocked, it needs to be cleaned using the appropriate method prior to suspecting component damage. Avoid poking needles, wires, or other improvised tools into the orifice. Damaging or enlarging that tiny opening can change the gas flow and bring more trouble.

Culprit #3 – Gas Safety Valve Is Failing

A valve problem looks almost identical to a bad thermocouple. The safety valve responds to the signal generated by the heated thermocouple. If the valve's internal mechanism fails, it may no longer stay open.

Testing a thermocouple and safety valve is a job performed by a qualified technician. Depending on the Garland model, the repair may involve replacing a separate safety valve or a combination gas control.

Culprit #4 (Often Overlooked) – External Factors

Factors like kitchen drafts and gas pressure/supply problems get overlooked.

Look at exactly when the problem happens. Did this start right after a kitchen layout change, a new piece of equipment nearby, or seasonal HVAC adjustments? Does the pilot go out when the exhaust system is running?

Strong or poorly directed airflow can interfere with a small pilot flame. On some equipment, an improperly adjusted main burner can also disturb the pilot.

If the flame is weak on all burners, and especially if multiple appliances are affected, the issue may involve gas pressure or the supply system. Contact the gas supplier.

Blue flames and a tall yellow-orange flame rise from a gas burner, accompanying a discussion of range pilot light problems.

When Does Your Garland Range Need Replacement Parts?

Not every pilot problem means something has failed. Sometimes a dirty component or an incorrect adjustment is all that's causing the pilot light to keep going out.

The repair may involve various Garland parts including a pilot assembly, thermocouple, pilot orifice, or gas safety control, depending on the technician's findings.

The table below ties the pilot light related symptoms to possible reasons. These are clues; the technician's testing and inspection will confirm which part actually needs replacing.

SymptomWhat it May Indicate
The pilot won't ignite at allBlocked pilot orifice, incorrect pilot adjustment, possible ignition problem
The pilot lights but goes out when the control is releasedIncorrect lighting procedure, weak pilot flame, thermocouple, safety valve issue
The pilot flame is unusually smallDirty pilot assembly, restricted gas flow, or incorrect adjustment
The pilot goes out when the main burner startsBurner adjustment or flame disturbance
The pilot goes out intermittently during serviceUnstable flame, airflow problems, gas supply issue

Frequently Asked Questions About Garland Range Pilot Lights

Why does my Garland pilot light go out when I release the knob?

On models with a thermocouple-based flame safety system, this can happen if the thermocouple hasn't heated enough, isn't positioned correctly, or isn't generating the necessary signal. Note that a weak pilot flame or faulty safety valve may produce similar symptoms, too.

First, confirm that you're following the correct lighting instructions for your model.

Can a dirty pilot cause a range to stop working?

Yes. Dirt or grease buildup can interfere with gas flow or flame quality. A blocked pilot orifice may prevent the pilot from lighting or producing a stable flame. Have the assembly inspected and cleaned.

How do I know if my Garland range thermocouple is bad?

A pilot that lights but won't remain lit after the control is released is one possible sign. However, this symptom alone doesn't confirm a faulty thermocouple. A technician needs to inspect the pilot flame and test the thermocouple and safety system. Also, some Garland burners don't use a thermocouple.

Bottom Line

A Garland range pilot light that keeps going out typically comes down to these causes: a worn thermocouple, a gas valve issue, grease buildup, or external factors like excessive airflow around the unit.

If inspection proves it's time to replace the part, getting replacements from a trusted brand name and supplier helps you avoid repeat repairs and keep your Garland range doing what it should: cooking food and bringing you revenue.

Blue flames burn beneath black stove grates, illustrating the topic of range pilot light maintenance.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *